HappyModel Mobula6 ECO 2024 HDZero ELRS

Description

The HappyModel Mobula6 ECO 2024 HDZero ELRS stands as the epitome of aerial excellence. Its AIO flight controller, with Serial ELRS Receiver and HDZERO system compatibility, seamlessly integrates with ultra-light SE0702 brushless motors and HDZERO NEW ECO VTX, delivering unparalleled flight performance. Ideal for 1S Lipo/LIHV setups, it promises a thrilling and powerful drone experience like no other.

Features:

• AIO Flight controller with Serial ELRS Receiver
• Compatible with HDZERO system
• Equipment with the lightest brushless motors-SE0702 only 1.49gram
• HDZERO NEW ECO VTX and Camera ready
• Smooth and powerful
• Compatible for 1S Lipo/LIHV
• Onboard blackbox read

Specifications:

• Model: Mobula6 ECO 2024
• Frame wheelbase: 65mm
• Weight: 23.16 gram without battery
• Size: 81mm*81mm*45mm
• Compatible with 1S Lipo battery or Lihv battery
• Battery Plug: GNB A30

Includes:

• 1x Mobula6 2024 1S 65mm whoop Drone Frame +Canopy
• 1x SuperX HD ELRS AIO flight controller
• 4x SE0702 KV28000 brushless motor
• 1x Gemfan 1208-3 31mm tri-blade propellers(4cw+4ccw)
• 1x HDZero ECO VTX
• 1x HDZero ECO Camera
• 1x Spare Canopy
• 1x Propeller disassemble tool
• 1x Screw driver

Motor:

• Mode: SE0702 KV28000
• Configu-ration: 9N12P
• Stator Diamter: 7mm
• Stator Length: 2mm
• Shaft Diameter: Φ1mm
• Motor Dimension(Dia.*Len): Φ9.5mm*14mm
• Weight(g): 1.49g
• No.of Cells(Lipo): 1S only

Propellers:

• Materials: PC
• Inch: 31mm
• Pitch: 0.8 in
• Weight: 0.21g
• Mount hole diameter:  1mm

Flight controller SuperX HD ELRS:

• Betaflight 4.4.2 firmware ready
• Firmware target: CRAZYBEEF4DX
• MCU: STM32F411CEU6 (100MHz, 512K FLASH)
• Sensor: BMI270 or ICM42688P (SPI connection)
• Power supply: 1-2S Lipo Lihv battery input (DC 2.8V~8.7V), only support 1s input for this drone
• Built-in 12A(each) Blheli_S 4in1 ESC Dshot300 read
• Built-in UART elrs receiver , elrs v3.0 ready, support WIFI and pass-through firmware update
• Bluejay ESC Firmware ready
• Built-in 5V 1A BEC
• Built-in voltage detection
• No betaflight analog osd chip

Onboard 4in1 ESC:

• Power supply: 1-2S LiPo/LiPo HV
• Current: 12A continuous peak 15A (3 seconds)
• Support ESC-Configurator and BLHELI_S Suite configurator
• Factory firmware: Z-H-30 – Bluejay, 0.19, 48kHz
• Default protocol: DSHOT300

Onboard Serial ExpressLRS 2.4GHz Receiver:

• RF Frequency: 2.4GHz
• Antenna: enameled copper wire 31mm length
• Telemetry output Power: <12dBm
• Receiver protocol: CRSF
• Default firmware version: ExpressLRS V3.0.1
• The same hardware with Happymodel EP1 receiver
• Could update firmware via ExpressLRS configurator or WIFI or Betaflight pass-through

HDZERO ECO VTX:

• Composite HD Video interface
• 1S-3S Input
• 25mW/200mW RF output
• 25.5×25.2 M2 soft mounting
• Antenna Retention
• 32.4×32.5mm (29x29mm inner)
• 4.5grames/4mm Thickness (w/o shielding)

HDZERO ECO Camera:

• Image Sensor  1/3”
• Resolution: 720@60fps   4:3
• LENS: FOV D:150° H:120° V:98°
• Shutter: Rolling Shutter
• Net Weight: 1.6g (With Cable)
• Dimensions: L14mm*W14mm*H13mm