HappyModel Mobula7 O4 2S 80mm Digital HD Micro FPV Whoop

Description

The HappyModel Mobula7 O4 2S 80mm Digital HD Micro FPV Whoop redefines micro drone performance with its powerful RS1102 KV10000 motors and HQPROP 45mm propellers. Featuring the DJI O4 air unit, it delivers stunning HD footage and ultra-smooth flights. Designed for indoor and backyard freestyle, its lightweight frame, ExpressLRS receiver, and 2S battery support ensure exceptional stability, responsiveness, and a thrilling FPV experience in any small-space environment.

Features:

• Equipment with New DJI O4 air unit
• 2S battery support Powerful and Smooth freestyle flying
• UART ExpressLRS receiver support stable control link
• Lighter and small for indoor FPV

Spare Parts Specifications:

Motor

• Mode: RS1102 KV10000
• Configuration: 9N12P
• Stator Diameter: 11mm
• Stator Length: 2mm
• Shaft Diameter: Φ1.5mm
• Motor Dimension (Dia. × Len): Φ13.5mm × 14mm
• Weight: 2.8g
• No. of Cells (Lipo): 1-2S

Propellers

• Weight: 0.33g
• Material: Polycarbonate
• Pitch: 0.9
• Propeller Diameter: 45mm
• Hub Thickness: 5mm
• Shaft: 1.5mm

Flight Controller

• MCU: STM32F405RGT6 (168MHz, 1Mbyte FLASH)
• GYRO Sensor: BMI270 (SPI connection)
• Mount Hole Size: 25.5mm × 25.5mm
• Power Supply: 1-2S battery input (DC 2.9V-8.7V)
• Built-in 12A (each) Blheli_S 4-in-1 ESC
• Built-in Serial ExpressLRS 2.4G
• Built-in BMP280 Barometer
• Built-in 8MBp Blackbox
• Built-in Voltage Meter Sensor, Voltage Meter Scale: 110
• Built-in Current Meter Sensor, Current Meter Scale: 470

Onboard 4-in-1 ESC

• Power Supply: 1-2S LiPo/LiPo HV
• Current: 12A continuous, peak 15A (3 seconds)
• Supports BLHeli_S Bluejay firmware
• Factory Firmware: Bluejay ESC V0.19
• Firmware Target: Z-H-30
• Default Protocol: DSHOT300
• When using 1S battery and high KV 0702/0802 motors, set startup power to 1100/1200

Onboard UART ExpressLRS 2.4GHz Receiver

• Packet Rate Options: 25Hz / 50Hz / 150Hz / 250Hz / 500Hz
• RF Frequency: 2.4GHz
• Antenna: Enameled copper wire, 31mm length
• Telemetry Output Power: <12dBm
• Default Firmware Version: ExpressLRS V3.0.1
• Firmware Target: HappyModel EP 2400 RX
• Firmware can be updated via ExpressLRS Configurator

DJI O4 Air Unit

• Weight:
  • Air Unit (camera module included): Approx. 8.2g
  • Transmission Module: 30 × 30 × 6mm (L × W × H)
  • Camera Module: 13.44 × 12.36 × 16.50mm (L × W × H)
  • Camera Cable Length: 50mm
  • Coaxial Cable: 50mm
  • 3-in-1 Cable: 50mm
• Operating Frequency:
  • 5.170-5.250 GHz
  • 5.725-5.850 GHz
  • (Operating frequency varies by region. Refer to local regulations.)
• Transmitter Power (EIRP):
  • 5.1 GHz: <23 dBm (CE)
  • 5.8 GHz:
    • <30 dBm (FCC)
    • <14 dBm (CE)
    • <30 dBm (SRRC)
• Live View Quality: 1080p at 30/50/60/100fps

Package Includes:

• 1 x Happymodel M80 Frame
• 1 x CrazyF405HD ELRS flight controller firmware target:BETAFLIGHTF4
• 4 x RS1102 KV10000 brushless motor
• 1 x HQPROP 45MMX3 tri-blade propellers(4cw+4ccw)
• 1 x DJI O4 Air unit
• 1 x Canopy
• 1 x Screw driver

Spare Parts (Not Included):

• Props:
  • OEM: HappyModel HQProp 45MMX2 Propeller for Mobula7 O4
  • Alternative: HQProp 45MM 3-Blade Micro Whoop Propeller 1.5mm
  • Alternative: Gemfan 45mm 3-Blade Micro Whoop Props 1.5mm Shaft (3 Colours)
• Battery options (xt30 compatible)
  • Tattu R-Line 550mAh 7.4V 2S1P 95C Lipo Battery
  • GNB LiPo Battery 7.6V 100C 550mAh 2S HV
  • BetaFPV LAVA 7.6V 75C 550mah 2S HV
• AIO: HappyModel CrazyF405HD AIO Flight Controller 12A BLHeli_S Uart ExpressLRS
• Motors: HappyModel RS1102 KV10000 Brushless Motor for Mobula7 O4
• Frame: HappyModel M80 Frame for Mobula7 O4
• Antenna: HappyModel Dipole Antenna for Mobula7 O4 Version 2pcs