Mateksys ExpressLRS 2.4G PWM Receiver 6PWM
by Mateksys
4.22 out of 5
(9 customer reviews)
Perfect for Gliders, Plane, and FPV Wing pilots, the ELRS-R24-P6 provides a 6xPWM output ExpressLRS receiver for use without a FC
$29.99
Hurry! Only 1 left in stock
Ships from our Tauranga warehouse
Description
Perfect for Gliders, Plane, and FPV Wing pilots, the ELRS-R24-P6 provides a 6xPWM output ExpressLRS receiver for use without a FC
Note this is ExpressLRS v3.0 not compatible with your V2.4 gear.
ELRS-R24-P6 Specifications
- ESP8285, SX1281
- Antenna connector: IPEX MHF 1
- 6x PWM outputs
- Support 2~8S VBat voltage sense
- RF Frequency: 2.4GHz (2400~2480MHz)
- Telemetry power: 12dbm
- Receiver output protocol: PWM
- Input voltage: 4~9V DC @ “+” pad
- Voltage sense: 34V Max. @ “VBat” pad
- Power dissipation: 45mA(binding), 85mA(wifi mode)
- PCB size: 20mm x 18mm
- Weight: 2g w/ antenna
- Packing:
- 1x ELRS-R24-P6
- 1x IPEX MHF1 Antennas. 15cm
- Dupont 2.54 pins (Board is shipped unsoldered)
Firmwares
- ExpressLRS 3.0 or newer, DIY 2.4 GHz / DIY 2400 RX PWMP EX
- ExpressLRS wiki for PWM receiver, Click HERE
- Make sure Receiver and TX module both are running ExpressLRS 3.0 or newer
Receiver has ExpressLRS 3.0 preloaded with binding phrase “123456”, the Receiver will never enter binding mode if using the traditional binding procedure.
You need to reflash it with your binding phrase OR go into WebUI to set your binding phrase.
Flashing via Wifi
- Disconnect ESC and servos from receiver first.
- Power on receiver by 5V source. Receiver’s LED(Red) will blink slow at first, and after 20s, it should blink fast indicating it’s on Wifi Hotspot Mode.
- More detailed steps, pls refer this page.
- Target: DIY 2.4 GHz / DIY 2400 RX PWMP EX
Flashing via UART
- Disconnect ESC and servos from receiver first.
- Wire the receiver into the USB-TTL adapter, with TX on receiver connected to the Rx on the USB-TTL, and RX on receiver connected to the Tx of the USB-TTL. Wire 5V and GND of the USB-TTL to 5V and GND of the Receiver.
- Press the boot button while powering on the receiver, then release – the Red LED on receiver should now be solid.
- Select the target DIY 2.4 GHz / DIY 2400 RX PWMP EX and “UART” for Flashing Method, set your bind phrase and Firmware Options and once done, click on Build and Flash.
Additional information
Brand | |
---|---|
Protocol |
9 reviews for Mateksys ExpressLRS 2.4G PWM Receiver 6PWM
Only logged in customers who have purchased this product may leave a review.
Related products
-
HappyModel TCXO ExpressLRS 2.4GHz EP1 Nano Receiver ELRS
4.83 out of 5(59) $29.99In stockAdd to cart -
TBS Crossfire Nano RX
4.93 out of 5(40) $52.99Out of stockRead more -
TBS Crossfire Sixty9 (VTX + Rx AIO)
4.90 out of 5(10) $84.99Out of stockRead more -
TBS Crossfire/Tracer Nano Rx 6ch PWM Adapter
5.00 out of 5(4) $7.99In stockAdd to cart -
TBS Crossfire Micro TX V2 Starter Set
5.00 out of 5(16) $219.99Out of stockRead more -
TBS Crossfire 6CH PWM Nano Rx
5.00 out of 5(1) $58.99In stockAdd to cart
Explore more from Mateksys
-
Mateksys BEC PRO 12S to 5/8/12V-5A
5.00 out of 5(1) $34.99Out of stockRead more -
Mateksys Power Module 12S w/ 3xBEC
$92.99In stockAdd to cart -
Mateksys ExpressLRS 2.4G True Diversity Receiver
$48.99In stockAdd to cart -
Mateksys RC Helicopter Flybarless Controller G474-HELI
5.00 out of 5(1) $94.99In stockAdd to cart -
Mateksys F405-WING-V2 Flight Controller
$109.99In stockAdd to cart -
Mateksys 2812 6-LED Board (Qty 4)
5.00 out of 5(4) $11.99In stockAdd to cart
Other products in the collection ExpressLRS
-
HappyModel TCXO ExpressLRS EPW6 2.4GHz 6CH PWM Receiver
4.75 out of 5(4) $31.99In stockAdd to cart -
HappyModel ES24TX Slim Pro 2.4GHz ExpressLRS TX Module
5.00 out of 5(7) $86.99Out of stockRead more -
Mateksys ExpressLRS 2.4G Vario Receiver
4.88 out of 5(8) $44.99Out of stockRead more -
Happymodel 80mm 2.4GHz Antenna for ExpressLRS TX module SMA
5.00 out of 5(2) $9.99In stockAdd to cart -
HappyModel EP82 VRX Backpack Module
5.00 out of 5(1) $9.99In stockAdd to cart -
Mateksys ExpressLRS 2.4G Diversity Receiver
4.89 out of 5(9) $36.99Out of stockRead more
Other ExpressLRS you might like
-
RadioMaster ER5A V2 2.4GHz 5Ch ELRS PWM Receiver
5.00 out of 5(6) $42.99In stockAdd to cart -
Mateksys ExpressLRS 2.4G Diversity Receiver
4.89 out of 5(9) $36.99Out of stockRead more -
RadioMaster ER4 2.4GHz 4Ch ExpressLRS PWM Receiver
4.50 out of 5(8) $31.99Out of stockRead more -
HappyModel EP82 VRX Backpack Module
5.00 out of 5(1) $9.99In stockAdd to cart -
RadioMaster ExpressLRS 2.4GHz RP2 V2 TCXO Nano Receiver
5.00 out of 5(1) $37.99In stockAdd to cart -
RadioMaster RP4TD ExpressLRS 2.4ghz Diversity Nano Receiver
5.00 out of 5(9) $49.99In stockAdd to cart
Other Planes you might like
-
AtomRC Dolphin Wing Parts (10 Options)
5.00 out of 5(3) $8.99 – $99.99In stockSelect options This product has multiple variants. The options may be chosen on the product page -
TBS Lucid 12S 90A ESC for Wing or Cinelifter
5.00 out of 5(1) $99.99Out of stockRead more -
HQProp Thin Electric Propeller 10×5 CCW
5.00 out of 5(1) $7.49Out of stockRead more -
Gemfan 6040 Glass Fiber Nylon 6×4 Electric Propeller (Pair)
4.67 out of 5(3) $4.49Out of stockRead more -
Hee Wing T2 Spare Parts (3 Types)
$24.99 – $42.99In stockSelect options This product has multiple variants. The options may be chosen on the product page -
HQProp Thin Electric Pusher Propeller 8×5 CW
5.00 out of 5(2) $6.49In stockAdd to cart
Other Receivers you might like
-
Antenna Tubing End Caps (10pcs)
4.90 out of 5(10) $2.99In stockAdd to cart -
RadioMaster XR4 Gemini Xrossband Dual-Band ExpressLRS Receiver
$76.99In stockAdd to cart -
RadioMaster ER8GV 2.4GHz 8Ch with Vario ExpressLRS PWM Receiver
5.00 out of 5(3) $79.99In stockAdd to cart -
RadioMaster ER5Ci 2.4GHz 3Ch ExpressLRS Land/Sea Receiver
5.00 out of 5(3) $39.99Out of stockRead more -
Mateksys ExpressLRS 2.4G Vario Receiver
4.88 out of 5(8) $44.99Out of stockRead more -
RadioMaster ER5C V2 2.4GHz 5Ch ExpressLRS PWM Receiver
5.00 out of 5(6) $42.99Out of stockRead more
Simon (verified owner) –
Nice
Will (verified owner) –
Excellent price. Be aware if your new to FPV stuff, the embedded systems are far more complicated than traditional receivers so make sure you aske for help from someone in the know. Plenty of support for the product online though. Fantastic customer service. Will be purchasing from the store again!
Anonymous (verified owner) –
Anonymous (verified owner) –
Jac C. (verified owner) –
Nice small ELRS PWM receiver. Only gripe is it uses generic firmware rather than Matek specific. Was a little confusing to update the firmware cause of this. Also works well as a crfs mode receiver if you want flexibility
Graham (verified owner) –
Jac Clarke (verified owner) –
Has a temperature bug which can cause a failsafe. Matek also refuses to work with the expresslrs team to fix the issue and get an official firmware for these
James P. (verified owner) –
Excellent