Mateksys ExpressLRS 2.4G PWM Receiver 6PWM
by Mateksys
4.22 out of 5
(9 customer reviews)
Perfect for Gliders, Plane, and FPV Wing pilots, the ELRS-R24-P6 provides a 6xPWM output ExpressLRS receiver for use without a FC
$29.99
Hurry! Only 1 left in stock
Ships from our Tauranga warehouse
Description
Perfect for Gliders, Plane, and FPV Wing pilots, the ELRS-R24-P6 provides a 6xPWM output ExpressLRS receiver for use without a FC
Note this is ExpressLRS v3.0 not compatible with your V2.4 gear.
ELRS-R24-P6 Specifications
- ESP8285, SX1281
- Antenna connector: IPEX MHF 1
- 6x PWM outputs
- Support 2~8S VBat voltage sense
- RF Frequency: 2.4GHz (2400~2480MHz)
- Telemetry power: 12dbm
- Receiver output protocol: PWM
- Input voltage: 4~9V DC @ “+” pad
- Voltage sense: 34V Max. @ “VBat” pad
- Power dissipation: 45mA(binding), 85mA(wifi mode)
- PCB size: 20mm x 18mm
- Weight: 2g w/ antenna
- Packing:
- 1x ELRS-R24-P6
- 1x IPEX MHF1 Antennas. 15cm
- Dupont 2.54 pins (Board is shipped unsoldered)
Firmwares
- ExpressLRS 3.0 or newer, DIY 2.4 GHz / DIY 2400 RX PWMP EX
- ExpressLRS wiki for PWM receiver, Click HERE
- Make sure Receiver and TX module both are running ExpressLRS 3.0 or newer
Receiver has ExpressLRS 3.0 preloaded with binding phrase “123456”, the Receiver will never enter binding mode if using the traditional binding procedure.
You need to reflash it with your binding phrase OR go into WebUI to set your binding phrase.
Flashing via Wifi
- Disconnect ESC and servos from receiver first.
- Power on receiver by 5V source. Receiver’s LED(Red) will blink slow at first, and after 20s, it should blink fast indicating it’s on Wifi Hotspot Mode.
- More detailed steps, pls refer this page.
- Target: DIY 2.4 GHz / DIY 2400 RX PWMP EX
Flashing via UART
- Disconnect ESC and servos from receiver first.
- Wire the receiver into the USB-TTL adapter, with TX on receiver connected to the Rx on the USB-TTL, and RX on receiver connected to the Tx of the USB-TTL. Wire 5V and GND of the USB-TTL to 5V and GND of the Receiver.
- Press the boot button while powering on the receiver, then release – the Red LED on receiver should now be solid.
- Select the target DIY 2.4 GHz / DIY 2400 RX PWMP EX and “UART” for Flashing Method, set your bind phrase and Firmware Options and once done, click on Build and Flash.
Additional information
Brand | |
---|---|
Protocol |
9 reviews for Mateksys ExpressLRS 2.4G PWM Receiver 6PWM
Only logged in customers who have purchased this product may leave a review.
Related products
-
Radiomaster R86C V2 6CH Frsky D8 Compatible PWM Receiver w/Sbus
5.00 out of 5(7) $28.99In stockAdd to cart -
TBS Shrink Tubes (40 x 23mm)
4.93 out of 5(15) $2.99In stockAdd to cart -
TBS Crossfire Receiver Nano – Special Edition
4.92 out of 5(48) $62.90Out of stockRead more -
TBS Crossfire Nano Rx Pro
5.00 out of 5(11) $71.99Out of stockRead more -
TBS Crossfire 6CH PWM Nano Rx
5.00 out of 5(1) $58.99In stockAdd to cart -
HappyModel TCXO ExpressLRS 2.4GHz EP2 Nano Receiver ELRS
5.00 out of 5(14) $27.99Out of stockRead more
Explore more from Mateksys
-
Mateksys BEC PRO 12S to 5/8/12V-5A
5.00 out of 5(1) $34.99Out of stockRead more -
Mateksys Power Module 12S w/ 3xBEC
$92.99In stockAdd to cart -
Mateksys ExpressLRS 2.4G True Diversity Receiver
$48.99In stockAdd to cart -
Mateksys RC Helicopter Flybarless Controller G474-HELI
5.00 out of 5(1) $94.99In stockAdd to cart -
Mateksys F405-WING-V2 Flight Controller
$109.99In stockAdd to cart -
Mateksys 2812 6-LED Board (Qty 4)
5.00 out of 5(4) $11.99In stockAdd to cart
Other products in the collection ExpressLRS
-
RadioMaster ExpressLRS UART Firmware flashing Dongle
4.67 out of 5(3) $24.99In stockAdd to cart -
Happymodel 80mm 2.4GHz Antenna for ExpressLRS TX module SMA
5.00 out of 5(2) $9.99In stockAdd to cart -
HappyModel VTx 5.8Ghz Dipole Antenna for Mobula6 2 Pieces (47mm)
4.80 out of 5(5) $4.99Out of stockRead more -
HappyModel TCXO ExpressLRS EPW6 2.4GHz 6CH PWM Receiver
4.75 out of 5(4) $31.99In stockAdd to cart -
Mateksys ExpressLRS 2.4G True Diversity Receiver
$48.99In stockAdd to cart -
Mateksys ExpressLRS 2.4G Vario Receiver
4.88 out of 5(8) $44.99Out of stockRead more
Other ExpressLRS you might like
-
RadioMaster RP4TD-M ExpressLRS 2.4ghz Race Receiver
5.00 out of 5(3) $39.99In stockAdd to cart -
Sale!
BETAFPV Moxon 915MHz Antenna for ExpressLRS (2 pack)
5.00 out of 5(1)$27.99Original price was: $27.99.$13.99Current price is: $13.99.In stockAdd to cart -
Jumper T20 V2 Hall Gimbals ExpressLRS 2.4GHz
5.00 out of 5(1) $249.99On PreorderAdd to cart -
RadioMaster Boxer Radio Transparent Edition (ExpressLRS)
5.00 out of 5(3) $329.99Out of stockRead more -
RadioMaster ExpressLRS 2.4GHz RP3 V2 TCXO Nano Receiver
5.00 out of 5(7) $46.99Out of stockRead more -
RadioMaster IPEX1 2.4GHz / Sub-G 900MHz Dual-Band T Antenna
$9.99In stockAdd to cart
Other Planes you might like
-
FMS 1.7m PA-18 Super Cub PNP with Reflex V2
$629.99Out of stockRead more -
EPO EPP Foam Bonding Glue
4.67 out of 5(3) $12.99Out of stockRead more -
FMS 3541-KV750 Plane Motor
5.00 out of 5(1) $54.99Out of stockRead more -
Hee Wing T1 Ranger Parts – Quick Release Fueslage Set
$29.99Out of stockRead more -
AtomRC 2212 Plane Motor 1400kV
$29.99In stockAdd to cart -
Hee Wing FX-25A ESC for T2 Cruza
$39.99In stockAdd to cart
Other Receivers you might like
-
Spektrum AR637T+ 6 Channel AS3X+ & SAFE Telemetry Receiver
$228.99Out of stockRead more -
RadioMaster RP4TD ExpressLRS 2.4ghz Diversity Nano Receiver
5.00 out of 5(12) $49.99In stockAdd to cart -
RadioMaster ER3Ci 2.4GHz 3Ch ExpressLRS Land/Sea Receiver
$33.99In stockAdd to cart -
RadioMaster ExpressLRS 2.4GHz RP3 V2 TCXO Nano Receiver
5.00 out of 5(7) $46.99Out of stockRead more -
Happymodel 2.4GHz Antenna for ExpressLRS EP1 RX compatible with TBS Tracer
5.00 out of 5(8) $7.49In stockSelect options This product has multiple variants. The options may be chosen on the product page -
RadioMaster ER8G 2.4GHz 8Ch ExpressLRS PWM Receiver
$66.99In stockAdd to cart
Graham (verified owner) –